22 results
Petals; an Assessment of the Outcomes of a Service for Bereavement During Childbirth.
- M. Agius, M. Spink, A. Magrill, J. Rogers, K. Burgess
-
- Journal:
- European Psychiatry / Volume 30 / Issue S1 / March 2015
- Published online by Cambridge University Press:
- 15 April 2020, p. 1
-
- Article
-
- You have access Access
- Export citation
-
Objectives
We aimed to evaluate the outcomes of Petals: a charitable organisation in Cambridgeshire. Petals provides counselling for women and couples who have suffered perinatal bereavement, or trauma during pregnancy or birth. This paper attempts to evaluate the effect of counseling interventions at this difficult time.
MethodsOutcomes were recorded in 42 patients using the CORE (Clinical Outcomes in
Routine Evaluation) system. CORE was developed to assess the effectiveness of psychological therapies. CORE-OM (CORE Outcome Measure) involves a
questionnaire that assesses subjective well-being, symptoms/problems, function, and risk to self and others. The CORE-OM questionnaire was completed before and after the counselling sessions.
ResultsThe CORE-OM scores were summated into a global representation of severity.
Severity decreased in all patients. Symptoms of psychological pathology were also decreased in all cases.
ConclusionA review of the available literature indicates that little is known about the efficacy of therapy for perinatal bereavement and trauma. These original data suggest convincing efficacy and benefits, but the numbers involved are small. Further trials with greater sample sizes are required.
A Soft Stretchable Sensor: Towards Peripheral Nerve Signal Sensing
- Charles Hamilton, Kevin Tian, Jinhye Bae, Canhui Yang, Gursel Alici, Geoffrey M. Spinks, Zhigang Suo, Joost J. Vlassak, Marc in het Panhuis
-
- Journal:
- MRS Advances / Volume 3 / Issue 28 / 2018
- Published online by Cambridge University Press:
- 20 February 2018, pp. 1597-1602
- Print publication:
- 2018
-
- Article
-
- You have access Access
- Export citation
-
We propose a 3D-printable soft, stretchable, and transparent hydrogel-elastomer device that is able to detect simulated ‘nerve’ signals. The signal is passed to a conductive hydrogel electrode through a non-contact method of capacitive coupling through polydimethylsiloxane (PDMS). We demonstrate that the device is able to detect sinusoidal waveforms passed through a simulated ‘nerve’ made from conductive hydrogel over a range of frequencies (1 kHz – 1 MHz). Analysis of signal detection showed a correlation to the electrode contact area and a Vin/Vout of larger than 10%. This provides the framework for the future development of a soft, 3D-printable, capacitive coupling device that can be used as a cuff electrode for detecting peripheral nerve signals.
Cryo Soft X-ray Tomography and Other Techniques at Diamond Light Source
- M.C. Darrow, M. Harkiolaki, M. Spink, I. Luengo, M. Basham, E.M.H. Duke
-
- Journal:
- Microscopy and Microanalysis / Volume 23 / Issue S1 / July 2017
- Published online by Cambridge University Press:
- 04 August 2017, pp. 972-973
- Print publication:
- July 2017
-
- Article
-
- You have access Access
- Export citation
Stretchable artificial muscles from coiled polymer fibers
- Geoffrey M. Spinks
-
- Journal:
- Journal of Materials Research / Volume 31 / Issue 19 / 14 October 2016
- Published online by Cambridge University Press:
- 09 September 2016, pp. 2917-2927
- Print publication:
- 14 October 2016
-
- Article
- Export citation
-
Soft robots are being developed to mimic the movement of biological organisms and as wearable garments to assist human movement in rehabilitation, training, and tasks encountered in functional daily living. Stretchable artificial muscles are well suited as the active mechanical element in soft wearable robotics, and here the performance of highly stretchable and compliant polymer coil muscles are described and analyzed. The force and displacements generated by a given stimulus are shown to be determined by the external loading conditions and the main material properties of free stroke and stiffness. Spring mechanics and a model based on a single helix are used to evaluate both the coil stiffness and the mechanism of coil actuation. The latter is directly coupled to a torsional actuation in the twisted fiber that forms the coil. The single helix model illustrates how fiber volume changes generate a partial fiber untwist, and spring mechanics shows how this fiber untwist generates large tensile strokes and high gravimetric work outputs in the polymer coil muscles. These analyses highlight possible as yet unexplored means for further enhancing the performance of these systems.
Identification of yield limiting phenological phases of oats to improve crop management
- J. M. FINNAN, J. SPINK
-
- Journal:
- The Journal of Agricultural Science / Volume 155 / Issue 1 / January 2017
- Published online by Cambridge University Press:
- 07 March 2016, pp. 1-17
-
- Article
- Export citation
-
The optimization of management practices for oats is hindered by a lack of knowledge of the critical phenological phases at which management should be focussed. The objective of the present review was to identify the yield-limiting phases in the growth of the oat crop in order to optimize management and to maximize yield. The methodology employed was to identify characteristics associated with either the pre-anthesis grain number determination phase or with the post-anthesis grain filling phase. Characteristics associated with the pre-anthesis phase were identified as a positive linear relationship between yield and grain number, in addition to insensitivity of grain weight to changes in assimilate supply. Characteristics associated with the post-anthesis grain filling phase were identified as an absence of a relationship between yield and sink size (grain number) and changes in grain weight in response to changes in assimilate supply. Data was taken from published literature. Yields of both winter- and spring-sown hulled oats increased linearly with grain number showing a strong influence of grain number on yield. Grain weight of both winter- and spring-hulled oats, however, decreased with increasing grain number suggesting that competition for assimilates may exist at high grain number. Further evidence of the influence of assimilate supply on grain yield was obtained from several studies which showed that yield increased with leaf area duration as well as from studies where grain weight was found to decrease after reductions in assimilate supply per grain, whereas grain weight increased when assimilate supply to grain was increased. Oat crops also feature a grain abortion mechanism when assimilate supply is constrained. Yield of naked oats increased with grain number before reaching a plateau, a trend which suggests source limitation at high grain numbers. The available evidence suggests that yield is primarily determined by grain number determination but that grain yield is also potentially limited by assimilate availability in the post-anthesis period. It is recommended that crop management strategies for oats should aim both to increase grain number in the pre-anthesis period but also prolong the grain filling period after anthesis. Such a post-anthesis strategy should both reduce the possibility of yield being limited by assimilate availability and compensate for the production of smaller grains at higher grain numbers.
3D/4D Printing Hydrogel Composites: A Pathway to Functional Devices
- Shannon E. Bakarich, Robert Gorkin III, Sina Naficy, Reece Gately, Marc in het Panhuis, Geoffrey M. Spinks
-
- Journal:
- MRS Advances / Volume 1 / Issue 8 / 2016
- Published online by Cambridge University Press:
- 11 December 2015, pp. 521-526
- Print publication:
- 2016
-
- Article
-
- You have access Access
- Export citation
-
The past few years have seen the introduction of a number of 3D and 4D printing techniques used to process tough hydrogel materials. The use of ‘color’ 3D printing technology where multiple inks are used in the one print allows for the production of composite materials and structures that can further enhance the mechanical performance of the printed hydrogel. This article reviews a number of 3D and 4D printing techniques for fabricating functional hydrogel based devices.
Strong tough gels for 3D tissue constructs
- Paul Calvert, Marc in het Panhuis, Geoffrey Spinks, Robert Gorkin III, Leo Stevens, Shannon E. Bakarich, Paul Balding, Damian M. Kirchmajer
-
- Journal:
- MRS Online Proceedings Library Archive / Volume 1622 / 2014
- Published online by Cambridge University Press:
- 28 February 2014, pp. 49-53
- Print publication:
- 2014
-
- Article
- Export citation
-
The mechanical characteristics of ionic-covalent entanglement hydrogels consisting of combinations of the biopolymers gellan gum and kappa-carrageenan, and the synthetic polymers polyacrylamide and an epoxy amine were investigated. Compression testing showed that these gels exhibited “double network” behavior, i.e. strong tough gels.
Contributors
-
- By Rose Teteki Abbey, K. C. Abraham, David Tuesday Adamo, LeRoy H. Aden, Efrain Agosto, Victor Aguilan, Gillian T. W. Ahlgren, Charanjit Kaur AjitSingh, Dorothy B E A Akoto, Giuseppe Alberigo, Daniel E. Albrecht, Ruth Albrecht, Daniel O. Aleshire, Urs Altermatt, Anand Amaladass, Michael Amaladoss, James N. Amanze, Lesley G. Anderson, Thomas C. Anderson, Victor Anderson, Hope S. Antone, María Pilar Aquino, Paula Arai, Victorio Araya Guillén, S. Wesley Ariarajah, Ellen T. Armour, Brett Gregory Armstrong, Atsuhiro Asano, Naim Stifan Ateek, Mahmoud Ayoub, John Alembillah Azumah, Mercedes L. García Bachmann, Irena Backus, J. Wayne Baker, Mieke Bal, Lewis V. Baldwin, William Barbieri, António Barbosa da Silva, David Basinger, Bolaji Olukemi Bateye, Oswald Bayer, Daniel H. Bays, Rosalie Beck, Nancy Elizabeth Bedford, Guy-Thomas Bedouelle, Chorbishop Seely Beggiani, Wolfgang Behringer, Christopher M. Bellitto, Byard Bennett, Harold V. Bennett, Teresa Berger, Miguel A. Bernad, Henley Bernard, Alan E. Bernstein, Jon L. Berquist, Johannes Beutler, Ana María Bidegain, Matthew P. Binkewicz, Jennifer Bird, Joseph Blenkinsopp, Dmytro Bondarenko, Paulo Bonfatti, Riet en Pim Bons-Storm, Jessica A. Boon, Marcus J. Borg, Mark Bosco, Peter C. Bouteneff, François Bovon, William D. Bowman, Paul S. Boyer, David Brakke, Richard E. Brantley, Marcus Braybrooke, Ian Breward, Ênio José da Costa Brito, Jewel Spears Brooker, Johannes Brosseder, Nicholas Canfield Read Brown, Robert F. Brown, Pamela K. Brubaker, Walter Brueggemann, Bishop Colin O. Buchanan, Stanley M. Burgess, Amy Nelson Burnett, J. Patout Burns, David B. Burrell, David Buttrick, James P. Byrd, Lavinia Byrne, Gerado Caetano, Marcos Caldas, Alkiviadis Calivas, William J. Callahan, Salvatore Calomino, Euan K. Cameron, William S. Campbell, Marcelo Ayres Camurça, Daniel F. Caner, Paul E. Capetz, Carlos F. Cardoza-Orlandi, Patrick W. Carey, Barbara Carvill, Hal Cauthron, Subhadra Mitra Channa, Mark D. Chapman, James H. Charlesworth, Kenneth R. Chase, Chen Zemin, Luciano Chianeque, Philip Chia Phin Yin, Francisca H. Chimhanda, Daniel Chiquete, John T. Chirban, Soobin Choi, Robert Choquette, Mita Choudhury, Gerald Christianson, John Chryssavgis, Sejong Chun, Esther Chung-Kim, Charles M. A. Clark, Elizabeth A. Clark, Sathianathan Clarke, Fred Cloud, John B. Cobb, W. Owen Cole, John A Coleman, John J. Collins, Sylvia Collins-Mayo, Paul K. Conkin, Beth A. Conklin, Sean Connolly, Demetrios J. Constantelos, Michael A. Conway, Paula M. Cooey, Austin Cooper, Michael L. Cooper-White, Pamela Cooper-White, L. William Countryman, Sérgio Coutinho, Pamela Couture, Shannon Craigo-Snell, James L. Crenshaw, David Crowner, Humberto Horacio Cucchetti, Lawrence S. Cunningham, Elizabeth Mason Currier, Emmanuel Cutrone, Mary L. Daniel, David D. Daniels, Robert Darden, Rolf Darge, Isaiah Dau, Jeffry C. Davis, Jane Dawson, Valentin Dedji, John W. de Gruchy, Paul DeHart, Wendy J. Deichmann Edwards, Miguel A. De La Torre, George E. Demacopoulos, Thomas de Mayo, Leah DeVun, Beatriz de Vasconcellos Dias, Dennis C. Dickerson, John M. Dillon, Luis Miguel Donatello, Igor Dorfmann-Lazarev, Susanna Drake, Jonathan A. Draper, N. Dreher Martin, Otto Dreydoppel, Angelyn Dries, A. J. Droge, Francis X. D'Sa, Marilyn Dunn, Nicole Wilkinson Duran, Rifaat Ebied, Mark J. Edwards, William H. Edwards, Leonard H. Ehrlich, Nancy L. Eiesland, Martin Elbel, J. Harold Ellens, Stephen Ellingson, Marvin M. Ellison, Robert Ellsberg, Jean Bethke Elshtain, Eldon Jay Epp, Peter C. Erb, Tassilo Erhardt, Maria Erling, Noel Leo Erskine, Gillian R. Evans, Virginia Fabella, Michael A. Fahey, Edward Farley, Margaret A. Farley, Wendy Farley, Robert Fastiggi, Seena Fazel, Duncan S. Ferguson, Helwar Figueroa, Paul Corby Finney, Kyriaki Karidoyanes FitzGerald, Thomas E. FitzGerald, John R. Fitzmier, Marie Therese Flanagan, Sabina Flanagan, Claude Flipo, Ronald B. Flowers, Carole Fontaine, David Ford, Mary Ford, Stephanie A. Ford, Jim Forest, William Franke, Robert M. Franklin, Ruth Franzén, Edward H. Friedman, Samuel Frouisou, Lorelei F. Fuchs, Jojo M. Fung, Inger Furseth, Richard R. Gaillardetz, Brandon Gallaher, China Galland, Mark Galli, Ismael García, Tharscisse Gatwa, Jean-Marie Gaudeul, Luis María Gavilanes del Castillo, Pavel L. Gavrilyuk, Volney P. Gay, Metropolitan Athanasios Geevargis, Kondothra M. George, Mary Gerhart, Simon Gikandi, Maurice Gilbert, Michael J. Gillgannon, Verónica Giménez Beliveau, Terryl Givens, Beth Glazier-McDonald, Philip Gleason, Menghun Goh, Brian Golding, Bishop Hilario M. Gomez, Michelle A. Gonzalez, Donald K. Gorrell, Roy Gottfried, Tamara Grdzelidze, Joel B. Green, Niels Henrik Gregersen, Cristina Grenholm, Herbert Griffiths, Eric W. Gritsch, Erich S. Gruen, Christoffer H. Grundmann, Paul H. Gundani, Jon P. Gunnemann, Petre Guran, Vidar L. Haanes, Jeremiah M. Hackett, Getatchew Haile, Douglas John Hall, Nicholas Hammond, Daphne Hampson, Jehu J. Hanciles, Barry Hankins, Jennifer Haraguchi, Stanley S. Harakas, Anthony John Harding, Conrad L. Harkins, J. William Harmless, Marjory Harper, Amir Harrak, Joel F. Harrington, Mark W. Harris, Susan Ashbrook Harvey, Van A. Harvey, R. Chris Hassel, Jione Havea, Daniel Hawk, Diana L. Hayes, Leslie Hayes, Priscilla Hayner, S. Mark Heim, Simo Heininen, Richard P. Heitzenrater, Eila Helander, David Hempton, Scott H. Hendrix, Jan-Olav Henriksen, Gina Hens-Piazza, Carter Heyward, Nicholas J. Higham, David Hilliard, Norman A. Hjelm, Peter C. Hodgson, Arthur Holder, M. Jan Holton, Dwight N. Hopkins, Ronnie Po-chia Hsia, Po-Ho Huang, James Hudnut-Beumler, Jennifer S. Hughes, Leonard M. Hummel, Mary E. Hunt, Laennec Hurbon, Mark Hutchinson, Susan E. Hylen, Mary Beth Ingham, H. Larry Ingle, Dale T. Irvin, Jon Isaak, Paul John Isaak, Ada María Isasi-Díaz, Hans Raun Iversen, Margaret C. Jacob, Arthur James, Maria Jansdotter-Samuelsson, David Jasper, Werner G. Jeanrond, Renée Jeffery, David Lyle Jeffrey, Theodore W. Jennings, David H. Jensen, Robin Margaret Jensen, David Jobling, Dale A. Johnson, Elizabeth A. Johnson, Maxwell E. Johnson, Sarah Johnson, Mark D. Johnston, F. Stanley Jones, James William Jones, John R. Jones, Alissa Jones Nelson, Inge Jonsson, Jan Joosten, Elizabeth Judd, Mulambya Peggy Kabonde, Robert Kaggwa, Sylvester Kahakwa, Isaac Kalimi, Ogbu U. Kalu, Eunice Kamaara, Wayne C. Kannaday, Musimbi Kanyoro, Veli-Matti Kärkkäinen, Frank Kaufmann, Léon Nguapitshi Kayongo, Richard Kearney, Alice A. Keefe, Ralph Keen, Catherine Keller, Anthony J. Kelly, Karen Kennelly, Kathi Lynn Kern, Fergus Kerr, Edward Kessler, George Kilcourse, Heup Young Kim, Kim Sung-Hae, Kim Yong-Bock, Kim Yung Suk, Richard King, Thomas M. King, Robert M. Kingdon, Ross Kinsler, Hans G. Kippenberg, Cheryl A. Kirk-Duggan, Clifton Kirkpatrick, Leonid Kishkovsky, Nadieszda Kizenko, Jeffrey Klaiber, Hans-Josef Klauck, Sidney Knight, Samuel Kobia, Robert Kolb, Karla Ann Koll, Heikki Kotila, Donald Kraybill, Philip D. W. Krey, Yves Krumenacker, Jeffrey Kah-Jin Kuan, Simanga R. Kumalo, Peter Kuzmic, Simon Shui-Man Kwan, Kwok Pui-lan, André LaCocque, Stephen E. Lahey, John Tsz Pang Lai, Emiel Lamberts, Armando Lampe, Craig Lampe, Beverly J. Lanzetta, Eve LaPlante, Lizette Larson-Miller, Ariel Bybee Laughton, Leonard Lawlor, Bentley Layton, Robin A. Leaver, Karen Lebacqz, Archie Chi Chung Lee, Marilyn J. Legge, Hervé LeGrand, D. L. LeMahieu, Raymond Lemieux, Bill J. Leonard, Ellen M. Leonard, Outi Leppä, Jean Lesaulnier, Nantawan Boonprasat Lewis, Henrietta Leyser, Alexei Lidov, Bernard Lightman, Paul Chang-Ha Lim, Carter Lindberg, Mark R. Lindsay, James R. Linville, James C. Livingston, Ann Loades, David Loades, Jean-Claude Loba-Mkole, Lo Lung Kwong, Wati Longchar, Eleazar López, David W. Lotz, Andrew Louth, Robin W. Lovin, William Luis, Frank D. Macchia, Diarmaid N. J. MacCulloch, Kirk R. MacGregor, Marjory A. MacLean, Donald MacLeod, Tomas S. Maddela, Inge Mager, Laurenti Magesa, David G. Maillu, Fortunato Mallimaci, Philip Mamalakis, Kä Mana, Ukachukwu Chris Manus, Herbert Robinson Marbury, Reuel Norman Marigza, Jacqueline Mariña, Antti Marjanen, Luiz C. L. Marques, Madipoane Masenya (ngwan'a Mphahlele), Caleb J. D. Maskell, Steve Mason, Thomas Massaro, Fernando Matamoros Ponce, András Máté-Tóth, Odair Pedroso Mateus, Dinis Matsolo, Fumitaka Matsuoka, John D'Arcy May, Yelena Mazour-Matusevich, Theodore Mbazumutima, John S. McClure, Christian McConnell, Lee Martin McDonald, Gary B. McGee, Thomas McGowan, Alister E. McGrath, Richard J. McGregor, John A. McGuckin, Maud Burnett McInerney, Elsie Anne McKee, Mary B. McKinley, James F. McMillan, Ernan McMullin, Kathleen E. McVey, M. Douglas Meeks, Monica Jyotsna Melanchthon, Ilie Melniciuc-Puica, Everett Mendoza, Raymond A. Mentzer, William W. Menzies, Ina Merdjanova, Franziska Metzger, Constant J. Mews, Marvin Meyer, Carol Meyers, Vasile Mihoc, Gunner Bjerg Mikkelsen, Maria Inêz de Castro Millen, Clyde Lee Miller, Bonnie J. Miller-McLemore, Alexander Mirkovic, Paul Misner, Nozomu Miyahira, R. W. L. Moberly, Gerald Moede, Aloo Osotsi Mojola, Sunanda Mongia, Rebeca Montemayor, James Moore, Roger E. Moore, Craig E. Morrison O.Carm, Jeffry H. Morrison, Keith Morrison, Wilson J. Moses, Tefetso Henry Mothibe, Mokgethi Motlhabi, Fulata Moyo, Henry Mugabe, Jesse Ndwiga Kanyua Mugambi, Peggy Mulambya-Kabonde, Robert Bruce Mullin, Pamela Mullins Reaves, Saskia Murk Jansen, Heleen L. Murre-Van den Berg, Augustine Musopole, Isaac M. T. Mwase, Philomena Mwaura, Cecilia Nahnfeldt, Anne Nasimiyu Wasike, Carmiña Navia Velasco, Thulani Ndlazi, Alexander Negrov, James B. Nelson, David G. Newcombe, Carol Newsom, Helen J. Nicholson, George W. E. Nickelsburg, Tatyana Nikolskaya, Damayanthi M. A. Niles, Bertil Nilsson, Nyambura Njoroge, Fidelis Nkomazana, Mary Beth Norton, Christian Nottmeier, Sonene Nyawo, Anthère Nzabatsinda, Edward T. Oakes, Gerald O'Collins, Daniel O'Connell, David W. Odell-Scott, Mercy Amba Oduyoye, Kathleen O'Grady, Oyeronke Olajubu, Thomas O'Loughlin, Dennis T. Olson, J. Steven O'Malley, Cephas N. Omenyo, Muriel Orevillo-Montenegro, César Augusto Ornellas Ramos, Agbonkhianmeghe E. Orobator, Kenan B. Osborne, Carolyn Osiek, Javier Otaola Montagne, Douglas F. Ottati, Anna May Say Pa, Irina Paert, Jerry G. Pankhurst, Aristotle Papanikolaou, Samuele F. Pardini, Stefano Parenti, Peter Paris, Sung Bae Park, Cristián G. Parker, Raquel Pastor, Joseph Pathrapankal, Daniel Patte, W. Brown Patterson, Clive Pearson, Keith F. Pecklers, Nancy Cardoso Pereira, David Horace Perkins, Pheme Perkins, Edward N. Peters, Rebecca Todd Peters, Bishop Yeznik Petrossian, Raymond Pfister, Peter C. Phan, Isabel Apawo Phiri, William S. F. Pickering, Derrick G. Pitard, William Elvis Plata, Zlatko Plese, John Plummer, James Newton Poling, Ronald Popivchak, Andrew Porter, Ute Possekel, James M. Powell, Enos Das Pradhan, Devadasan Premnath, Jaime Adrían Prieto Valladares, Anne Primavesi, Randall Prior, María Alicia Puente Lutteroth, Eduardo Guzmão Quadros, Albert Rabil, Laurent William Ramambason, Apolonio M. Ranche, Vololona Randriamanantena Andriamitandrina, Lawrence R. Rast, Paul L. Redditt, Adele Reinhartz, Rolf Rendtorff, Pål Repstad, James N. Rhodes, John K. Riches, Joerg Rieger, Sharon H. Ringe, Sandra Rios, Tyler Roberts, David M. Robinson, James M. Robinson, Joanne Maguire Robinson, Richard A. H. Robinson, Roy R. Robson, Jack B. Rogers, Maria Roginska, Sidney Rooy, Rev. Garnett Roper, Maria José Fontelas Rosado-Nunes, Andrew C. Ross, Stefan Rossbach, François Rossier, John D. Roth, John K. Roth, Phillip Rothwell, Richard E. Rubenstein, Rosemary Radford Ruether, Markku Ruotsila, John E. Rybolt, Risto Saarinen, John Saillant, Juan Sanchez, Wagner Lopes Sanchez, Hugo N. Santos, Gerhard Sauter, Gloria L. Schaab, Sandra M. Schneiders, Quentin J. Schultze, Fernando F. Segovia, Turid Karlsen Seim, Carsten Selch Jensen, Alan P. F. Sell, Frank C. Senn, Kent Davis Sensenig, Damían Setton, Bal Krishna Sharma, Carolyn J. Sharp, Thomas Sheehan, N. Gerald Shenk, Christian Sheppard, Charles Sherlock, Tabona Shoko, Walter B. Shurden, Marguerite Shuster, B. Mark Sietsema, Batara Sihombing, Neil Silberman, Clodomiro Siller, Samuel Silva-Gotay, Heikki Silvet, John K. Simmons, Hagith Sivan, James C. Skedros, Abraham Smith, Ashley A. Smith, Ted A. Smith, Daud Soesilo, Pia Søltoft, Choan-Seng (C. S.) Song, Kathryn Spink, Bryan Spinks, Eric O. Springsted, Nicolas Standaert, Brian Stanley, Glen H. Stassen, Karel Steenbrink, Stephen J. Stein, Andrea Sterk, Gregory E. Sterling, Columba Stewart, Jacques Stewart, Robert B. Stewart, Cynthia Stokes Brown, Ken Stone, Anne Stott, Elizabeth Stuart, Monya Stubbs, Marjorie Hewitt Suchocki, David Kwang-sun Suh, Scott W. Sunquist, Keith Suter, Douglas Sweeney, Charles H. Talbert, Shawqi N. Talia, Elsa Tamez, Joseph B. Tamney, Jonathan Y. Tan, Yak-Hwee Tan, Kathryn Tanner, Feiya Tao, Elizabeth S. Tapia, Aquiline Tarimo, Claire Taylor, Mark Lewis Taylor, Bishop Abba Samuel Wolde Tekestebirhan, Eugene TeSelle, M. Thomas Thangaraj, David R. Thomas, Andrew Thornley, Scott Thumma, Marcelo Timotheo da Costa, George E. “Tink” Tinker, Ola Tjørhom, Karen Jo Torjesen, Iain R. Torrance, Fernando Torres-Londoño, Archbishop Demetrios [Trakatellis], Marit Trelstad, Christine Trevett, Phyllis Trible, Johannes Tromp, Paul Turner, Robert G. Tuttle, Archbishop Desmond Tutu, Peter Tyler, Anders Tyrberg, Justin Ukpong, Javier Ulloa, Camillus Umoh, Kristi Upson-Saia, Martina Urban, Monica Uribe, Elochukwu Eugene Uzukwu, Richard Vaggione, Gabriel Vahanian, Paul Valliere, T. J. Van Bavel, Steven Vanderputten, Peter Van der Veer, Huub Van de Sandt, Louis Van Tongeren, Luke A. Veronis, Noel Villalba, Ramón Vinke, Tim Vivian, David Voas, Elena Volkova, Katharina von Kellenbach, Elina Vuola, Timothy Wadkins, Elaine M. Wainwright, Randi Jones Walker, Dewey D. Wallace, Jerry Walls, Michael J. Walsh, Philip Walters, Janet Walton, Jonathan L. Walton, Wang Xiaochao, Patricia A. Ward, David Harrington Watt, Herold D. Weiss, Laurence L. Welborn, Sharon D. Welch, Timothy Wengert, Traci C. West, Merold Westphal, David Wetherell, Barbara Wheeler, Carolinne White, Jean-Paul Wiest, Frans Wijsen, Terry L. Wilder, Felix Wilfred, Rebecca Wilkin, Daniel H. Williams, D. Newell Williams, Michael A. Williams, Vincent L. Wimbush, Gabriele Winkler, Anders Winroth, Lauri Emílio Wirth, James A. Wiseman, Ebba Witt-Brattström, Teofil Wojciechowski, John Wolffe, Kenman L. Wong, Wong Wai Ching, Linda Woodhead, Wendy M. Wright, Rose Wu, Keith E. Yandell, Gale A. Yee, Viktor Yelensky, Yeo Khiok-Khng, Gustav K. K. Yeung, Angela Yiu, Amos Yong, Yong Ting Jin, You Bin, Youhanna Nessim Youssef, Eliana Yunes, Robert Michael Zaller, Valarie H. Ziegler, Barbara Brown Zikmund, Joyce Ann Zimmerman, Aurora Zlotnik, Zhuo Xinping
- Edited by Daniel Patte, Vanderbilt University, Tennessee
-
- Book:
- The Cambridge Dictionary of Christianity
- Published online:
- 05 August 2012
- Print publication:
- 20 September 2010, pp xi-xliv
-
- Chapter
- Export citation
Staphylococcal sepsis in mothers and newborn babies
- M. S. Spink
-
- Journal:
- Journal of Hygiene / Volume 60 / Issue 1 / March 1962
- Published online by Cambridge University Press:
- 15 May 2009, pp. 105-112
-
- Article
-
- You have access Access
- Export citation
-
A serious outbreak of staphylococcal infections in the maternity units in Blackburn was investigated. There were considerably more than one hundred cases of breast abscesses altogether, well over half of which occurred in primiparae. Staphylococcus aureus, phage type 80, was the predominating organism throughout the outbreak and at the peak period during the early part of the outbreak this type was responsible for nearly 80% of the infections.
After the introduction of a number of procedures for the general reduction of cross-infection the incidence of breast abscess fell markedly and a controlled trial of an antibacterial cream, containing neomycin and hibitane, which was applied to the nasal mucosa of all infants and mothers in the test group of patients, was undertaken. The conditions obtaining in the test and control groups were identical in every way except that the control patients did not receive the neomycin-hibitane cream. There were about 1250 mothers and infants each in the test and control groups; the incidence of breast abscesses in the test group was 0·8% and in the control group it was 2·7%. The method adopted for the detection and treatment of carriers among the nursing staff broke down on two occasions; this fact and the emergence of an unforeseen source resulted in a larger number of infections than should have occurred. Had it not been for these incidents there is little doubt that the trial would have shown more conclusively the effectiveness of the neomycinhibitane cream, by the method laid down, in reducing cross-infection.
Investigation of the bacterial flora on the nasal mucosa of over 1000 infants in the control group yielded results of considerable interest. Of 300 cases where there was early colonization by Staph. albus, this organism established its dominating position in 70% of the cases and it was not subsequently displaced by Staph. aureus. The significance of this observation and the evidence favouring nasal dissemination of Staph.aureus as the most important cause of hospital cross-infection are discussed.
Understanding the effect of a triazole with anti-gibberellin activity on the growth and yield of oilseed rape (Brassica napus)
- P. M. BERRY, J. H. SPINK
-
- Journal:
- The Journal of Agricultural Science / Volume 147 / Issue 3 / June 2009
- Published online by Cambridge University Press:
- 09 March 2009, pp. 273-285
-
- Article
- Export citation
-
The effects of the anti-gibberellin triazole metconazole on yield, lodging resistance, seeds/m2 (sink size) and rooting in the presence of negligible amounts of disease were investigated using five multi-site experiments carried out in the UK between 1999 and 2007. The green area index (GAI) of the crop at the time of application had the greatest influence on the yield response across 173 comparisons between metconazole-treated and untreated crops. Crops with a GAI in March (growth stage (GS) 3·3–3·5 ‘green bud’) of 0·8–2·8, which represented moderate to large sized UK commercial crops, had an average response of +0·21 t/ha to metconazole applied at the full recommended rate of 1·2 litres/ha. Crops with a GAI of less than 0·8, which represented small commercial crops, had an average response of −0·14 t/ha. Applications between green bud and early flowering gave the greatest yield increase. Positive yield responses were associated with a reduction in lodging, or more seeds/m2, or a combination of both. The proportional area lodged was reduced by 0·1 for each 50 mm reduction in crop height (R2=0·60; P<0·001). Across six field trials, metconazole applied in spring increased root length density between soil depths of 0·40 and 1·00 m from an average of 0·478 to 0·601 cm/cm3 (P<0·05). It was estimated that this could increase yield by 0·2–0·3 t/ha in a dry season. The results show that the growth regulatory properties of metconazole can be used to improve several key aspects of growth that are believed to restrict current farm yields.
Carbon Nanotube Electroactive Polymer Materials: Opportunities and Challenges
- Liangti Qu, Qiang Peng, Liming Dai, Geoffrey M. Spinks, Gordon G. Wallace, Ray H. Baughman
-
- Journal:
- MRS Bulletin / Volume 33 / Issue 3 / March 2008
- Published online by Cambridge University Press:
- 31 January 2011, pp. 215-224
- Print publication:
- March 2008
-
- Article
- Export citation
-
Carbon nanotubes (CNTs) with macroscopically ordered structures (e.g., aligned or patterned mats, fibers, and sheets) and associated large surface areas have proven promising as new CNT electroactive polymer materials (CNT-EAPs) for the development of advanced chemical and biological sensors. The functionalization of CNTs with many biological species to gain specific surface characteristics and to facilitate electron transfer to and from them for chemical- and bio-sensing applications is an area of intense research activity.
Mechanical actuation generated by CNT-EAPs is another exciting electroactive function provided by these versatile materials. Controlled mechanical deformation for actuation has been demonstrated in CNT mats, fibers, sheets, and individual nanotubes. This article summarizes the current status and technological challenges for the development of electrochemical sensors and electromechanical actuators based on carbon nanotube electroactive materials.
Serum prohepcidin concentration: no association with iron absorption in healthy men; and no relationship with iron status in men carrying HFE mutations, hereditary haemochromatosis patients undergoing phlebotomy treatment, or pregnant women
- Mark A. Roe, Caroline Spinks, Anne-Louise M. Heath, Linda J. Harvey, Rob Foxall, Jennie Wimperis, Christian Wolf , Susan J. Fairweather-Tait
-
- Journal:
- British Journal of Nutrition / Volume 97 / Issue 3 / March 2007
- Published online by Cambridge University Press:
- 01 March 2007, pp. 544-549
- Print publication:
- March 2007
-
- Article
-
- You have access Access
- HTML
- Export citation
-
Hepcidin plays a major role in iron homeostasis, but understanding its role has been hampered by the absence of analytical methods for quantification in blood. A commercial ELISA has been developed for serum prohepcidin, a hepcidin precursor, and there is interest in its potential use in the clinical and research arena. We investigated the association between serum prohepcidin concentration and iron absorption in healthy men, and its relationship with iron status in men carrying HFE mutations, hereditary haemochromatosis patients, and pregnant women. Iron absorption was determined in thirty healthy men (fifteen wild-type, fifteen C282Y heterozygote) using the stable isotope red cell incorporation technique. Iron status was measured in 138 healthy men (ninety-one wild-type, forty-seven C282Y heterozygote), six hereditary haemochromatosis patients, and thirteen pregnant women. Mean serum prohepcidin concentrations were 214 (sd 118) ng/ml [208 (sd 122) ng/ml in wild-type and 225 (sd 109) ng/ml in C282Y heterozygotes] in healthy men, 177 (sd 36) ng/ml in haemochromatosis patients, and 159 (sd 59) ng/ml in pregnant women. There was no relationship between serum prohepcidin concentration and serum ferritin in any subject groups, nor was it associated with efficiency of iron absorption. Serum prohepcidin is not a useful biomarker for clinical or research purposes.
A physiological analysis of oilseed rape yields: Past and future
- P. M. BERRY, J. H. SPINK
-
- Journal:
- The Journal of Agricultural Science / Volume 144 / Issue 5 / October 2006
- Published online by Cambridge University Press:
- 18 September 2006, pp. 381-392
-
- Article
- Export citation
-
Oilseed rape yields on farms have not increased in several countries, including the UK, since the mid 1980s. This may be because the yield potential for the environment in these countries has been reached, or due to a lack of genetic improvement, or due to changes in the environment of the growing crop caused by crop management practices. The present paper investigates which of these factors may be causing the yield of farm crops in the UK to remain at 3 t/ha. The yield potential for the UK that would be possible by combining the best characteristics that have been observed with the best crop management is estimated to be significantly greater than average farm yields at 6·5 t/ha (90 g/kg moisture content). In order to achieve 6·5 t/ha, a crop would have a flower cover of less than 0·4 to facilitate the production of 130000 seeds/m2. Seed filling must last 46 days and have a solar radiation use efficiency of 0·75 g of seed/MJ. A tenth of the yield must come from stem reserves and the seed weight must be 5·0 mg. All of these characteristics have been achieved; therefore the challenge lies in combining these traits within the same crop. The ultimate yield potential for water retentive soils in the UK is estimated at 9·2 t/ha. This would require new characteristics to be bred into the crop and represents a long-term target. In the UK, new oilseed rape varieties are introduced each year and the yield of these varieties under optimum growing conditions is estimated to have increased by 62 kg/ha/year between 1978 and 2005. Lack of genetic improvement is therefore unlikely to explain the halt in farm yields. There have been trends for farm crops to be grown in shorter rotations, established using minimal cultivations rather than ploughing and to receive less nitrogen fertilizer. Sulphur applications have increased, but probably have not kept pace with the reduction in deposition from the atmosphere. Fungicide applications to farm crops are less than applied to the variety testing system and are unlikely to offer complete disease control. It is concluded that a combination of these crop management factors has caused the halt in yield improvement on UK farms.
Estimation of economically optimum seed rates for winter wheat from series of trials
- C. M. THEOBALD, A. M. I. ROBERTS, M. TALBOT, J. H. SPINK
-
- Journal:
- The Journal of Agricultural Science / Volume 144 / Issue 4 / August 2006
- Published online by Cambridge University Press:
- 31 July 2006, pp. 303-316
-
- Article
- Export citation
-
The results of recent trials for winter wheat (Triticum aestivum L.) have influenced farming practice in the UK by encouraging the use of lower seed rates. Spink et al. (2000) have demonstrated that, particularly if sown early, wheat can compensate for reduced plant populations by increased tiller production.
Results from seed-rate trials are usually analysed separately for each environment or each combination of environment and variety, and not combined into a single model. They therefore address the question of what the best seed rate would have been for each combination, rather than answer the more relevant question of what rate to choose for a future site. The current paper presents a Bayesian method for combining data from seed-rate trials and choosing optimum seed rates: this method can incorporate information on seed and treatment costs, crop value and covariates. More importantly, for use as an advisory tool, it allows incorporation of expert knowledge of the crop and of the target site.
The method is illustrated using two series of trials: the first, carried out at two sites in 1997–99, investigated the effects of sowing date and variety in addition to seed rate. The second was conducted at seven sites in 2001–03 and included latitude and certain management factors. Recommended seed rates based on these series vary substantially with sowing date and latitude.
Two non-linear dose-response functions are fitted to the data, the widely used exponential-plus-linear function and the inverse-quadratic function (Nelder 1966). The inverse-quadratic function is found to provide a better fit to the data than the exponential-plus-linear and the latter function gives estimated optimum rates which are as much as 40% lower. The economic consequences of using one function rather than the other are not great in these circumstances.
The method is found to be robust to changes in the prior distribution and to other changes in the model used for dependence of yield on sowing date, latitude, variety and management factors.
Modelling of Polypyrrole Actuators
- Mehrdad Bahrami Samani, Philip G. Whitten, Geoffrey M. Spinks, Christopher D. Cook
-
- Journal:
- MRS Online Proceedings Library Archive / Volume 889 / 2005
- Published online by Cambridge University Press:
- 01 February 2011, 0889-W05-03
- Print publication:
- 2005
-
- Article
- Export citation
-
Conducting polymers (CP) are a promising area in the field of micro actuators, and have potential applications in micro robotics. Their properties are modelled as having an electro-chemical active component and a passive viscoelastic component. Methods exist to model the passive component as a configuration of springs and dashpots and the electro-active effects as a strain generator. Typically, the strain is assumed to be proportional to the charge transferred, and the two components are assumed to be independent. We show that there is a significant interaction between the two components for polypyrrole actuators, by observing the dynamic elastic modulus whilst varying the electric potential. The elastic modulus was measured in-situ by applying a high frequency rectangular isotonic stress input and recording the corresponding strain output. Two separate potential control inputs, vs. a reference electrode, were used. In the first experiment, a triangular voltage signal with variable frequency was applied to the PPy helix tube actuator and in the second experiment; a step voltage signal was applied to the actuator. The value of total real modulus was calculated during both experiments to evaluate the effect of actuation on the mechanical properties of PPy actuator. The performance of the mentioned method was confirmed by comparing its results to that of a sinusoidal stress input during a temperature ramp through the glass transition of polyethylene terephthalate (PET). We show that polypyrrole actuators show a complex change in stiffness with contractile state, which mimic skeletal muscle [1].
A comparison of root and stem lodging risks among winter wheat cultivars
- P. M. BERRY, J. H. SPINK, A. P. GAY, J. CRAIGON
-
- Journal:
- The Journal of Agricultural Science / Volume 141 / Issue 2 / September 2003
- Published online by Cambridge University Press:
- 28 January 2004, pp. 191-202
-
- Article
- Export citation
-
Plant characters that determine stem and root lodging were measured on 15 winter wheat cultivars at three UK sites between 2000 and 2002. A model of lodging was used to estimate stem failure wind speeds (resistance to stem lodging) and anchorage failure wind speeds (resistance to root lodging). The degree and type of natural lodging was also recorded in the plots and this correlated well with the stem and anchorage failure wind speeds. Only a weak correlation (R2=0·33) was observed between the stem and anchorage failure wind speeds for the 15 cultivars. This can be explained by the absence of genetic correlation between the plant characters that determine the stem and anchorage strength. There was a significant interaction between type of lodging (stem or root) and cultivar for failure wind speed (P<0·001). This showed that the difference between the resistances for root and stem lodging was not the same for all cultivars. Separate classifications for the stem and root lodging resistance of cultivars are developed that would allow the most appropriate crop management to reduce the risk of both types of lodging. Significant differences were found between cultivars for all lodging-related plant characters (P<0·05). These resulted in the cultivar range of the anchorage failure moment to be 110% of the overall mean. Stem failure moment, shoot and plant base bending moments had ranges of 37–49% of their overall means. Breeders should select for wide, deep root plates and wide stems with a high stem wall failure yield stress for the greatest improvement in lodging resistance.
Pneumatic Actuator Response from Carbon Nanotube Sheets
- Geoffrey M. Spinks, Gordon G. Wallace, Leonard S. Fifield, Larry R. Dalton, Alberto Mazzoldi, Danilo De Rossi, Ilyas I. Khayrullin, Ray H. Baughman
-
- Journal:
- MRS Online Proceedings Library Archive / Volume 706 / 2001
- Published online by Cambridge University Press:
- 15 March 2011, Z9.22.1
- Print publication:
- 2001
-
- Article
- Export citation
-
Reversible actuation strains in excess of 2% in the sheet direction and over 300% in the thickness direction have been produced by single wall carbon nanotube mats when electrochemically charged to +1.5V (vs. SCE) in aqueous sodium chloride solution. The observed strains represent a ten-fold increase over that previously reported for carbon nanotube actuators, and is considerably larger than that achievable with polymer ferroelectric actuators. The enhanced actuator strains result from a new mechanism of electrochemically induced “pnuematic actuation” where high pressure gas forms within the porous structure of the nanotube mat causing partial delamination and swelling. An erasable “memory” effect was also observed for pneumatic actuation driven by hydrogen gas evolution/storage in the nanotube electrodes.
Foraging in wild and captive colonies of the common mole-rat Cryptomys hottentotus hottentotus (Rodentia: Bathyergidae)
- Andrew C. Spinks, Trevor A. Branch, Shula Croeser, Nigel C. Bennett, Jennifer U. M. Jarvis
-
- Journal:
- Journal of Zoology / Volume 249 / Issue 2 / October 1999
- Published online by Cambridge University Press:
- 01 October 1999, pp. 143-152
- Print publication:
- October 1999
-
- Article
- Export citation
-
The foraging behaviour of wild and captive colonies of the common mole-rat Cryptomys hottentotus hottentotus was investigated. Field studies were undertaken at Steinkopf, an arid site in the Northern Cape, South Africa. The resource biomass and the total available energy here were amongst the highest recorded for any bathyergids, but geophytes were sparse and widely distributed. The low probability of locating these widely dispersed resources should promote co-operative foraging in these mole-rats. All common geophyte species were consumed, probably because high burrowing costs favour dietary generalism. The mole-rat biomass per metre of burrow system (0.5–1.5 g.m-1) remains the lowest of any subterranean mammal. Burrow depths and diameters were positively correlated to the average mass of the mole-rats in each colony, apparently minimizing energetic costs and maximizing foraging success. Bulbs were stored in central food caches, and both field and laboratory data indicated size-based selectivity in their storage and consumption. As predicted by central place foraging theory, large bulbs were preferentially stored, and small bulbs preferentially consumed. However, factors other than energetic considerations may also influence these storage decisions. Total consumption time of bulbs was negatively correlated to animal size, and furthermore smaller bulbs were consumed more rapidly than larger ones. In addition to geophyte-storing, C. h. hottentotus also exhibited an alternative foraging strategy, termed ‘geophyte farming’, in which large bulbs were left and eaten in situ, and served as a renewable resource. Together with these foraging specializations, the evolution of sociality in mole-rats is a key factor which enables them to live in some of the most formidable habitats in Africa.
Regulation of reproduction in female common mole-rats (Cryptomys hottentotus hottentotus): the effects of breeding season and reproductive status
- A. C. Spinks, N. C. Bennett, J. U. M. Jarvis
-
- Journal:
- Journal of Zoology / Volume 248 / Issue 2 / June 1999
- Published online by Cambridge University Press:
- 01 June 1999, pp. 161-168
- Print publication:
- June 1999
-
- Article
- Export citation
-
The effects of breeding season and reproductive status on female reproduction were investigated in the common mole-rat, Cryptomys hottentotus hottentotus, a co-operatively breeding rodent that exhibits seasonal breeding and a reproductive division of labour. Body mass, reproductive tract morphometrics, ovarian histology and plasma testosterone concentrations were studied in 80 females from 42 wild-caught colonies. Although the birth of offspring is restricted to the summer, qualitative analysis of ovarian histology revealed that females retained reproductive function during the winter non-breeding period. Seasonal differences were found in ovarian morphometrics and testosterone concentrations and are probably associated with the occurrence of pregnancy in reproductive females during the breeding period. The continuance of reproductive function during the non-breeding period in female common mole-rats parallels the situation in males, and is believed to be important in dispersal in C. h. hottentotus. The non-breeding period coincides with the period of maximal dispersal opportunities in the winter rainfall areas inhabited by the common mole-rat. Reproductive activation in dispersing animals may aid intersexual recognition, assist pair-bond formation and thereby facilitate independent reproduction. Reproductive and non-reproductive females exhibited a similar degree of reproductive function, and as for season, the only clear-cut status-related differences were associated with the occurrence of pregnancy in reproductive females. This absence of a physiologically well-defined suppression of reproduction in female common mole-rats is similar to the situation in males. Incest taboos between philopatric siblings may negate the need for a rigorous suppression of reproduction in subordinate colony members of this obligate outbreeder.
A method of monitoring water absorption in polymers using a depth sensing indentation system
- I. A. Ashcroft, G. M. Spinks
-
- Journal:
- Journal of Materials Research / Volume 11 / Issue 2 / February 1996
- Published online by Cambridge University Press:
- 31 January 2011, pp. 529-536
- Print publication:
- February 1996
-
- Article
- Export citation
-
The mechanical properties of many polymers are known to change as they absorb water. This fact has been used to monitor the absorption of water into the surface layers of an epoxy adhesive with a depth sensing indentation system. Two methods have been demonstrated. The sample can be immersed in water for a period of time and then removed and tested in air. Alternatively, the sample can be tested in in situ. In the second method the transport of water through the adhesive can clearly be seen in hardness/depth profiles. Hardness, elastic modulus, and creep strain of the adhesive change with time until a stable value is reached, which corresponds to full plasticization of the adhesive to the influence depth of the indenter. The initial mechanical properties of the epoxy are mostly recovered on drying.